Say hello to our new bathroom sink!

My goal is to try to post after each day we complete work on the bathroom. I had a lot of fun this weekend getting back into my groove and then I realized when I first woke up this morning why we don't do this much anymore lol.

 

After sanding and prepping the surface the day before, It was time to add the primer.

                                                   And added a second coat of primer....

As you can see, even sanding didn't really do a great job hiding the imperfections, which is going to make painting quite an interesting job...I will have to research my options..so for now, I am just leaving it as it is for now...

My next step was to go through the big pile of cedar boards we pulled down from the prior day and pull out the ones we can re-purpose. I pulled all of the nails out and started applying a first layer of primer to each board and let them dry.

     And then I applied a second coat of primer. After they dried, I applied the first coat of paint. While that was drying, I went to go check on my hubby to see his progress.

So he managed to remove all of the wall tiles in this section, removed the heat register, and got rid of the awful pedestal sink. Well, we didn't get rid of it..it's siting in the basement for the time being, we are thinking of adding a half bathroom downstairs if and when we eventually remodel the basement.

 First panel of chair rail up to create a natural border.

  Slowly and carefully install each panel. This includes applying adhesive to the first one and then using special concrete screws.

Looking better already!

                                                                    New sink in place.

                                                      Modern, bronze finished faucet.

       When all of the panels are in place I will cover up those screws and apply another coat of paint,   but for now, I think I can handle this new look over those dreaded wall tiles.

                                Floorboard molding..I guess the flooring doesn't look all that bad...

Well, that was enough work for one day. The rest will have to be pulled out and worked on in sections. I think the biggest and most time consuming part of this whole project will be to pull the same ugly wall tile down that is in the shower, and replace it with more modern glass subway tile.
So tell me what you think. Any ideas for painting a textured wall like we have in the bathroom?

 

It's a Bathroom Demo!!!

Not that the winter months are gloomy enough, welcome to our bathroom. You've seen pictures of it before when we first bought the house. How do my husband and I bond? We start ripping apart things that seem like they may be an easy fix to find that the work is more extensive. This turns into frustrations, which turn into arguments. But I have to say, we've gotten to a point in our relationship where one of us just walks out of the room for a few minutes to cool down. Welcome to an adult relationship.

Ok, so the tile on the floor isn't all that bad. I can live with or without it but notice the tiling on the walls, which extend all the way throughout the bathroom and even in the shower. It's dull, it's boring, and its a pain in the butt for me to clean.

 

The wood on the ceiling? Ok, we can handle that. It's actually quite nice, giving the room a spa like feel but the cedar extending on the top part of the bathroom? Who does that? It makes the room dark and dank and it's not even sealed. So every time we take a shower, moisture gets trapped in them creating mold and mildew. I don't know about you, but I don't really want to be breathing that stuff in any more than I have to.

I do have to say I was quite afraid of what we would find underneath those panels.

Luckily, we aren't putting our house on the market in one month like the last one so we don't have to rush, we can do everything right aaaand we get to choose fixtures that we like.

Our goal? Add a little more light and appeal to our only bathroom to not only increase the value of our house, but make it a little more welcoming when we have guests over.

Soooo..here goes phase 1:

 Remove first layer: cedar wood paneling. Oh, look how pretty that is, NOT! Who chose this wallpaper? And look at the yellow staining on it. no wonder they just chose to cover it with wood paneling.

After removing the wallpaper, we discovered the wall is plaster and where the mirror was was a blocked off area where I'm guessing a medicine cabinet had been before. We were kind of hoping to find some secret treasure especially since in our last house after knocking out a crappy built in bookcase we found a bunch of creepy childrens toys and vhs tapes..but of course we weren't that lucky. 

Now our bathroom looks even creepier than before...It looks like a room out of a really sketchy cheap hotel room.

Next, we pulled the remaining nails out and lightly sanded. Then came the spackling. Than the sanding. And then more spackling...and more sanding.

We put one coat of primer up, removed some of the wall tile to see what was behind it, and are calling it a day.

Paint Color Samples

For all of those wondering how much wall one small color sample will cover, well here ya go!
Our next project is the living room. We want to have an accent wall where the fireplace is, and the rest of the room will be some other complimenting lighter color.
For the Behr color samples, you get about 7.25fl oz or 215mL's. The Lowe's color samples will give you a little more (7.5 fl oz).
Here is the before:

 

And here is right after I finished painting. Because the wall is already grey, I will literally only need to roll on a light coat over it. So, under 10 bucks to paint an accent wall? I'll take it!

 

More to follow

 

Ready for a New Year

First of all, let me say that this blogger is making me irate because I started typing and when I went to add a picture, it decided nope, I'm just going to make your computer freeze and not let you do anything each time you click on this logo. Perhaps they are working on something? Anyways, I'm going to continue to write this and add in pictures as soon as it lets me..

     Before the new year begins, I figured I should at least update this at least once. To be completely honest, I have been becoming so drained from my job it makes it hard to motivate myself on doing anything around the house. I know it's not an excuse to slack off on the home improvement area ( not that I gain or lose anything from not doing anything), but sometimes making changes to your surroundings improves your mood and makes you motivated to continue onto other projects around the house.
     We wanted to start off slow and ease our way into putting our own personal touches on the house. The dining room seemed to be the way to go. Why? Well, because we have never had a dining room therefore, we had no furniture making it just easier to work on.
     After you have decided on what room you want to give a facelift to, you need to decide on what color you would like. If you have no idea or are completely new to the world of painting, an easy thing to do is to go to Google and type in "dining room" or whichever room you are interested in. You will get a wide variety of images at the tips of your fingers.
This is what we wanted to do:

     Go to Lowe's or home depot and spend the 2 bucks on color samples. Believe you me, the colors on those swatches are almost never ever even barely remotely close to the actual samples you paint on the wall. Take for example, the following pictures followed by links to the swatches and judge for yourselves.

Left: Behr: Oriental Eggplant

http://www.homedepot.com/p/BEHR-Premium-Plus-Ultra-1-Gal-PPU17-2-Oriental-Eggplant-Flat-Enamel-Interior-Paint-175301/204105516#

 

Middle: Martha Stewart: Eggplant

 

Right: Behr: Deep Aubergine

http://www.homedepot.com/p/BEHR-Premium-Plus-Ultra-1-Gal-PPU17-2-Oriental-Eggplant-Flat-Enamel-Interior-Paint-175301/204105516#

 

On the left is Valspar: Purple Prickly-Pear:

http://www.myperfectcolor.com/en/color/30010_Valspar-243A-4-Purple-Prickly-pear

 

On the Right is Martha Stewart: Eggplant:

http://www.myperfectcolor.com/en/color/316911_Martha-Stewart-MSL182-Eggplant

                                      

     After playing around with the two colors that we thought we would use, we thought that both hues of purple would darken the room. We decided we would like to use a lighter cream color on the bottom and add in chair rail. These colors remind me of Monet's use of color in his water lily paintings which I absolutely loooove.

     The ceiling also had to be repainted. I chose a very light color, it was almost white with a splash of purple in it. By doing this, it seems that the light reflects better in a way that makes the room look lighter than it really is.

    That ugly plastic stained glass looking light fixture? Gone! And replaced with a much more modern brushed metal fixture.

 

     I got the curtains from Bed Bath and Beyond on clearance for 50 bucks (originally $50 for each panel). The curtain rods are from hobby lobby. They were $25 total.

     The final step will be to install crown molding. Unfortunately, the hubby's truck needs a new starter and is stuck in the garage so that is going to be put on hold for now.

Finishing our Platform Bed

I know that it has been quite a while since I last updated but with it being busy season at work, I really haven't been up to working on many projects let alone have the time to sit down and write in my blog.
We did finally finish our platform bed for our master suite upstairs =)
On my last entry regarding the platform bed, I led you all up to step 4 but we couldn't very well assemble the base of the bed until after it had dried for a day or two.

After the 2 x 10's have dried, you can assemble them. To add extra support to them, we decided to add some bracing at the corners.

 

We used two wood screws at each corner to put the base together.

 

After all of the boards were held in place, we added some extra bracing with wood for more support.

The second level is going to be pretty much the same idea as the first level, except we used 2 x4's, which are going to be larger. We used the dimensions of a king size mattress and added 1/2 an inch to each side.

 

After finishing the second level, we placed that over the base. The outside edges were stained and polyurethane was applied and let dry.

\

Finally, mdf board was cut and secured into place.

 

Well there you have it. Our very own platform bed. We decided to use a memory foam mattress in place of a regular mattress.

 

And here is a random picture I took while we were at the zoo because I was testing out my new camera.

Using Chalk Paint

                   For the past week when I have not been working, I have been working on a little side project. I have been refinishing an old desk of mine with chalk paint. If you have never heard of chalk paint before, don't feel left out. I recently have discovered it when my husband and I went to an antique co-op where one of the vendors was displaying it and some pieces she had refinished with it. Immediately I started looking at furniture in a whole new light. You can purchase the chalk paint for 30 bucks a quart or you can make it yourself which is half the cost.
So here is a list of things that you need to get started:
- The item you want to refinish.
- A quart of latex paint, your choice of color
- Mixing quart cans
- Plaster of Paris
- Water
- Hand sander
- Paint brush
- Wooden paint stirrer
- Measuring cups and spoons (ones that you can specifically designate for projects)
- Furniture Wax
- Old rags

Step 1: Clean the dust and debris off of the item so you have flat surfaces to paint on. Remove the hardware.

 Step 2: Make chalk paint if you decided to make it yourself. Now there are many recipes out there to make chalk paint. The one I used called for:
                                 - 1 cup of latex paint
                                 - 2 1/2 Tbsp Plaster of Paris
                                 - 1 1/2 Tbsp of cold water

When I started mixing, it became really hard really fast. So I had to keep adding water a little bit at a time to make sure it had a smooth consistency. I recommend working in small sections at a time. I found it a little difficult to work with and you want to put an even thin coat on. It does dry pretty quickly, and you really have to work it with your brush. You also have to continually stir the mixture so the plaster of paris doesn't sink to the bottom.
                   Once you've applied the first coat and let it dry, you can apply a second coat. Let that dry. If you are happy with that result, you can go onto the next step.

Step 3: Distressing.. This part is actually kind of fun. I basically took the hand sander and distressed around the edges of the desk and on the drawers. If you are really artistic, you can even add stencils in but the way I see it is, the more simple it is, the better it looks. I don't really like furniture when people just make it look busy. I think simple is elegant.

Step 4: Waxing. I have never applied wax to furniture before but it is pretty much the same concept of waxing your car. Some people apply polyurethane to the finished product instead, but after reading up on the pro's and cons of each, I just decided to go with wax. You can just take an old rag, get a little wax on it, and just apply it to the surface. The instructions on the product I purchased said to wait 15 minutes before buffing it. After you buff it, you sand it, and can apply another coat to it. After you are satisfied with that, you can add the hardware onto it.

            I was not a big fan of the original hardware on it, so I decided to go with some really nice antique-y hardware that I am purchasing from an architectural salvage store in the city. They are a little pricey, so I only purchased one so far to see if it would go well so I am going to have to go back and purchase the rest.

Voila! I have taken an old piece of furniture and transformed it into something new for my new office space. Now I just need to finish unpacking! Maybe another day...